** Monitors and Chassis List** |
|
| These are the monitors and chassis
that I have. Email me at mailto:msandwick@hotmail.com
if you have any information. Go back to the main parts page by clicking here |
|
| Updates: 01/07/2012: Selling off remaining inventory then closing down. If there is N/A in price column, make an offer! Prices do not including shipping. |
Prices: |
| Monitors (All are 19" unless otherwise specified): | |
| Wells Gardner 19K4900 (Works) Needs cap kit (top portion squised, otherwise great picture). front / screen | $70 |
| Matsushita TM202G (Non working) No burn in. powers up, has image on screen, but starts smoking after being on for about 30 seconds. Has some kind of NTSC output board. front / additional board | $20 |
| Wells Gardner 19K4600 (Mostly works) Cap kit, slight pac-man burn in. Brightness a little bright (retrace lines visible, won't adjust all the way down. front / screen | Pending |
| Wells Gardner 19K4600 Vertical (Works) Vertical mount. Light burn in from Bosconian. original caps but beautiful pic. front / screen | Pending |
| Sharp Image SI-320C (mostly works) Flat screen. Has a weave/ripple on the screen. front / screen | $75 |
| Wells Gardner 13K7801 13" (Non working) 13" monitor. No picture. front | $20 |
| Motorola XM-501 B&W (Works) Tested in 2003. Has Space Invaders color overlays. front | $50 |
| Chassis: | |
| Electrohome G07 chassis #14 (Non working) Newer caps and orig flyback. Power connector cut off | $15 |
| Sanyo 20EZV chassis (incomplete) Missing a few capacitors. Flyback is labeled works but sparks. | $20 |
| Electrohome G05-801 HV unit (untested) - Complete, G05-801 EHT Supply Issue - 5 Part Number: 50-1410-01 | $20 |
| Wells Gardner 19K4900 chassis #1 (non working) - Missing a few caps, had vertical collapse prior to removing caps | $15 |
| Wells Gardner 19K4900 chassis #2 (non working) - several cracks in chassis and neckboard | $15 |
| Electrohome G08 HV unit (looks complete but focus knob broken off, and looks like modification on bottom) untested | $20 |
| Happ Controls KJ-1915 (New) New in 2004, arrived dead, Ken Layton fixed, and I put into box since. front | N/A |
| Sanyo 20EZV Nintendo (Works) Cap kitted, also works with compositive negative sync. Audio board capped and working. front / screen | N/A |
| Sanyo 20EZV Nintendo (Works) Cap kitted. Works but flyback starts arcing after a long run. Audio board works. front / screen | N/A |
| Sanyo 20EZV Nintendo (Partial working) Works but bad ripple and makes loud buzzing noise. Audio board works. front / screen | N/A |
| Sanyo 20EZV Nintendo (Non working) Image is scrambled, screen shuts off after being on for a few minutes. Audio board works. front / screen | N/A |
| Sharp XM-2001N (works) Slight burn in. Great picture. Audio amp works front / screen | N/A |
| Wells Gardner 19K7689 (Works) Repaired by Ken Layton 9/04. Newer style monitor, no burn in, cap kit front / screen | N/A |
| Wells Gardner 15V2000 B&W XY 15" (Works) Cap and transistor kit, new pots and HV rectifier. front | N/A |
| Wells Gardner 15V2000 B&W XY 15" (Mostly works) Cap and transistor kit. Works but F101 blows after running for a few hours. Battlezone burn in. front | N/A |
| Wells Gardner 13K7801 13" (Works) 13" monitor. Great picture. front / screen | N/A |
| Wells Gardner 19K4900 Vertical (Works) Vertical mount. Has burn in from Taito game. front / screen | N/A |
| Wells Gardner 13K4800 13" (Non working) Q303 broken leg, yoke wires need switching. front | N/A |
| Electrohome G07 tube (good) light berzerk burn in | N/A |
| Electrohome G07 chassis #3 (Works) Orig caps and flyback. screenshot | N/A |
| Electrohome G07 chassis #10 (works) Orig caps and flyback. Bit of curl on top. screenshot | N/A |
| Electrohome G07 chassis #1 (Works) New caps, original flyback. Vertical is squished on top and bottom. screenshot | N/A |
| Electrohome G07 chassis #2 (Non working) New caps, original flyback. Vertical collapse (thin line on screen). screenshot | SOLD |
| Electrohome G07 chassis #4 (Non working) Orig caps and flyback. No HV | SOLD |
| Electrohome G07 chassis #5 (Non working) Newer caps and orig flyback. No HV | SOLD |
| Electrohome G07 chassis #6 (Non working) Orig caps and flyback. No horizontal output transistor | $15 |
| Electrohome G07 chassis #7 (Non working) Orig caps and flyback. Missing small fuse | $15 |
| Electrohome G07 chassis #8 (Non working) Orig caps and flyback. Has HV but no picture | $15 |
| Electrohome G07 chassis #9 (Non working) Some newer caps and orig flyback. Has HV but no picture | $15 |
| Electrohome G07 chassis #11 (Non working) Orig caps and flyback. Labeled "Shorted horiz to vert pins?" | $15 |
| Electrohome G07 chassis #12 (Non working) Orig caps and flyback. Cracked flyback | SOLD |
| Electrohome G07 chassis #13 (Non working) Orig caps and flyback. Missing vert output transistors x401 and x402 | $10 |
